Toilet Seat Cover Dispenser Mounting Height
Made from black abs plastic, this is a durable dispenser that will provide a clean image for any washroom. Toilet paper dispensers can be mounted above the side grab bar if they do not protrude into the 12” high minimum clearance above the bar and the outlet is within the maximum 48” height.
Rodan toilet seat paper dispenser for recessed mounting overall height:
Toilet seat cover dispenser mounting height. Place the dispenser between toilet and lavatory, with top. Made from white abs plastic, this is a durable dispenser that will provide a bright, clean image for any washroom. Toilet seat cover dispensers note:
Toilet seat cover dispenser 6. Download product pdf product information txt bim object. The toilet paper dispenser in the designated accessible stall is inaccessible because it is mounted 40 inches from the rear wall.
Model 584 recessed seat cover dispenser. Dispenses 1.5 pads of tissue seat covers. With large roll dispensers, ensuring that the outlet is within the height limit can be difficult when mounted above bars unless they are recessed.
Asi surface mounted seat cover and toilet paper dispenser. Unit 15 3⁄4″ w, 11″ h, 2″ d (400 x 280 x 50mm). 30 (760 mm) from bottom of unit to floor.
14 inches (355 mm) 14 to 17 inches (355 to 430 mm) 17 to 19 inches (430 to 485 mm) Recommend placing dispenser 2 inches beyond grab bar with top of dispenser at 3 feet to 2 inches above finished floor. The tork toilet seat cover dispenser is the optimal solution for any size washroom.
The dispensers should not obstruct grab bars or other toilet mounting aids. Mounting heights • accessories other than toilet tissue dispensers must be mounted with “operable parts” no more than 48” above the floor. Code requires that they be placed with operable parts at a 40 inch maximum height.
Allow 5″ (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from. 11 to 12 inches (280 to 305 mm) 12 to 15 inches (305 to 380 mm) 15 to 17 inches (380 to 430 mm) grab bar height: In general the height to install toilet paper holder around 26 inches 66cm.
Unless otherwise noted, suggested mounting height is the distance from the floor to the bottom of the dispenser. Made of durable styrene plastic, it is built to last. The opening for toilet seat covers needs to be mounted between 15 inches and 48 inches (380 and 1220mm) above the floor, in an accessible location in the accessible compartment, typically away from the vicinity of the toilet itself (figs.
(not shown) similar to 04823, but with stainless steel skirt for surface mounting. Exposed surfaces have satin ﬁ nish. Toilet seat cover dispensers are an optional hygienic amenity that can easily be provided in all toilet compartments.
This height provides easy access from either a standard height toilet which is 14 1 2 inches tall at the seat level or a comfort height toilet which is 16 1 2 inches tall. Includes self adhesive tape for mounting. The tork toilet seat cover dispenser is the optimal solution for any size washroom.
• 2009 icc/ansi standards limit operable portions of toilet tissue dispensers to no lower than 18. This is another optional but recommended accessory in all stalls, including accessible ones. Require wheelchair clear floor space.
18 to 20 inches (455 to 510 mm) 20 to 25 inches (510 to 635 mm) 25 to 27 inches (635 to 685 mm) dispenser height: Style c adds 3 height to a toilet seat to help you comply with ada. • where accessories are mounted above an obstruction they must be located between 44 and 48.
In the title iii regulations 28 cfr part 36 issued by the u s.
cover, dispenser, seat, toilet