Sprinkler Cover Plate Installation
Install the cover plate assembly by turning it clockwise until tight against the ceiling. Can be used in conjunction with senju sprinkler’s protective cap removal tool.
The covers are installed flush with the ceiling to provide a smooth appearance, and are available in several standard decorative finishes to meet design requirements.
Sprinkler cover plate installation. The cover plate and cup design allows installation of the sprinkler and pressure testing of the fire fighting system prior to installation of a suspended ceiling or final painting of the ceiling. Tyco ty3531 series rfii 135f grey white concealed sprinkler cover plate. When the plate's temperature rating is reached, it falls away to expose the sprinkler head.
Close the base plate around the thread. Place the cover plate on the installation tool. Viking cover plates may also be custom ordered with any color by any paint manufacturer.
Model rfc30, rfc30ll, rfc43, rfc43ll, rfc49 and rfc49ll sprinklers allow 1/2” (13 mm) of cover plate adjustment. Gently place the base of the cover plate assembly over the sprinkler. Lift the cover plate to the sprinkler head and push the cap firmly in place.
Viking’s cover plate installation tools work just as well with these new threaded models. Domed concealed sprinklers you install. The sprinkler cover assembly can be removed and.
See the cover plate chart on page 7 for standard colors and finishes. Model g5 cover plates are installed by pushing the cover plate into the cup and turning in the clockwise direction until it is tight against the ceiling. Wrench on any other part of the sprinkler/ cup assembly.
At the same time, hold the cage to the base plate until the base plate engages the cage with its four tangs. Remove the cap to install the sprinkler, then replace the cap until the cover plate is installed. An inconspicuous cover plate provides a clean look for sprinkler heads.
A clip is wedged between the sprinkler body portion and the deflector plate. † the gasket and cover plate of the sealing” sprinklers Push or thread the cover plate assembly onto the sprinkler, using even pressure with the palm of the hand, until the unfinished
Installing a new cover plate is as simple as twisting or pushing it on. Concealed cover plate/cup assemblies are. The clip includes a peripheral edge or tab portion projecting radially outwardly beyond a peripheral portion of the sprinkler body portion.
It is currently gaining a lot of attention from our customers because of the many benefits of using it, including the fact that it provides a safer and quicker installation by eliminating the use of ladder. A cover plate simply screws into the concealed fire sprinkler to provide aesthetic benefits and protect the sprinkler from dirt, dust, and debris, similar to escutcheons (learn the difference between an escutcheon and a cover plate). † if required to reassemble the gasket to the cover plate, do not glue the gasket into place or allow the gasket to overlap both the cover plate and flange of the skirt.
Requires turning the cover plate in the counter clockwise direction. The fire sprinkler cover plate comes soldered to a frame piece that screws or pushes into the fire sprinkler head assembly. Model rfc30, rfc30ll, rfc43, rfc43ll, rfc49 and rfc49ll sprinklers.
Not applicable on square shaped cover plates. Struction before the cover plate is installed. • specially designed for installing and removing tyco lfii, rfii and rfiii flat plate concealed cover plates • contains foam insert to prevent scratching of cover plate finish • attaches to painter’s pole, or a length of 1” cpvc pipe
Once the cover plate is installed, there should be a small gap between the ceiling and the lip of the cover plate. Gently place the base of the cover plate assembly over the sprinkler. The cover is now installed.
Installation requires the use of a flat head screw driver. After installation, inspect all sprinklers to ensure that there is a gap between the cover plate and ceiling and that the four cup slots are open and free from any air flow impediment to the space above. Installing a new cover plate is as simple as twisting or pushing it on.
Place the base plate around the top thread of the sprinkler head closest to the frame. Sprinkler housing is threaded to fix cover plate with cup assembly to provide 6.5 mm (1/4”) vertical adjustment. The unit must be installed in the pendent position for the concealed sprinkler.
Make sure the cover plate is securely locked in, fail to do so may cause the sprinkler to malfunction. The sprinkler head assembly sits above the ceiling with the cover plate covering the ceiling opening at a flush level. Sprinkler housing is threaded to fix cover plate with cup assembly to provide 6.5 mm (1/4”) vertical adjustment.
A pendent style sprinkler includes a sprinkler body portion and a plug valve assembly having a sleeve secured to a deflector plate on an outlet side of the sprinkler body portion. The cap is factory installed inside the sprinkler cup. Sprinkler prior to installation of the cover plate with cup.
cover, installation, plate, sprinkler